K&M - Controlled Depth Reamer Size:6mm-338 cal consistency and high performance they

consistency and high performance they demand

15XXX Pilots

exposed turrets with a zero stop ring

The free floating

This means that you will be able to train by simply using a paper target or a standard target installation

K&M - Controlled Depth Reamer Size:6mm-338 cal consistency and high performance theyThe K&M case mouth chamfer tool cuts a shallow angle chamfer on the inside of the case neck for smooth bullet seating while controlling the depth of cut with stop fingers that register on the case mouth which insures each case has the same depth chamfer. The chamfer angle is 4 degrees per side. The tool also incorporates a pilot pin that guides through the flash hole of the cartridge to maintain the tool on the centerline of the cartridge for an even